{"title":"C7 Corvette","description":"\u003cp\u003eC7 Corvette Parts\u003c\/p\u003e","products":[{"product_id":"afe-power-momentum-intake-system-pro-5r-chevrolet-corvette-c7-v8-6-2l-14-19","title":"aFe Power Momentum Intake System Pro 5R Chevrolet Corvette C7 V8 6.2L 14-19","description":"\u003cp\u003eaFe is proud to introduce the all new Momentum sealed intake system. This all new Momentum intake system resulted in 18 horsepower and 22 lbs. x ft. torque and outflows the factory intake by 42%. This system is superior in every way, from the one-piece sealed housing, to the massive air filter, roto-molded tube w\/ built-in resonance chamber and premium hardware. This system uses a CAD designed, dyno-tuned, roto-molded intake tube \u0026amp; housing to achieve maximum power gains while maintaining a perfect fit. This is a direct bolt-on kit and requires no cutting or drilling on OEM parts. The one-piece sealed housing is used to eliminate the use of multiple components and ensure the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene and mounts directly into the factory location on the fender well to capture the coolest air available from the factory intake tract. This system uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has a built-in resonance chamber to catch un-wanted air intake noises. Two billet aluminum fittings are mounted on the tube to provide a perfect connection with the factory vacuum lines. This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive 7\" oval flange and is 9-1\/2\" tall Pro 5R filter media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium stainless steel T-bolt clamps and a reinforced silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation. After a rigorous design and testing phase, the results are in. The Momentum air intake system outflowed the factory intake by 42% and resulted in 18 additional horsepower and 22 lbs. x ft. torque. Power, Protection and Simplicity.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cp\u003eUnique One-Piece Housing with Sight Window\u003c\/p\u003e\n\u003cp\u003eRoto-molded Tube\u003c\/p\u003e\n\u003cp\u003e7\" oval flange and 9-1\/2\" tall Pro 5R filter media\u003c\/p\u003e\n\u003cp\u003ePremium Hardware\u003c\/p\u003e\n\u003cp\u003eUp to 18 horsepower and 22 lbs. x ft. torque gains\u003c\/p\u003e\n\u003cp\u003eFitment:\u003c\/p\u003e\n\u003cp\u003eChevrolet Corvette V8 6.2L (C7) 14-19\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47249653465226,"sku":"afe54-74201","price":447.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/rn-image_picker_lib_temp_b9a5cfd5-dcd5-42c0-8d0a-03852c7059c8.webp?v=1762129243"},{"product_id":"lg-motorsports-carbon-intake-side-covers-c7-corvette","title":"LG Motorsports Carbon Intake Side Covers, C7 Corvette","description":"\u003cp\u003eThe LG7ISC Carbon Intake Side Covers by LG Motorsports are engineered to enhance the aesthetic and functional aspects of your Chevrolet Corvette C7 Stingray. Crafted from high-quality carbon fiber, these side covers provide a sleek, lightweight alternative to the factory plastic trim panels, ensuring a refined look under the hood.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAuthentic carbon fiber construction ensures durability and a premium appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDesigned specifically for the C7 Corvette, ensuring a precise fit without modification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eGlossy finish that complements the aggressive styling of the Corvette.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDirect replacement for the OEM panels, allowing for a straightforward installation process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThe LG7ISC side covers are confirmed to fit the following models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Corvette C7 Stingray (2014-2019)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette Grand Sport (2017-2019)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette Z06 (2014-2019)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette ZR1 (2019)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese carbon fiber side covers can be paired with LG Motorsports' coil and center intake cover for a complete intake package, enhancing both performance and visual appeal. When installed, they provide a distinct upgrade that sets your Corvette apart from the crowd.\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47249791385738,"sku":null,"price":295.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/LGMotoLG7ISC.webp?v=1762136899"},{"product_id":"corvette-c7-z06-grand-sport-front-rotors","title":"Corvette C7 Z06, Grand Sport Front Rotors, A1-147","description":"\u003cp\u003e\u003cspan\u003eThe Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc front rotors are approx 1.6lbs lighter per rotor then the stock units. 23.6 lbs. vs. 22.0 lbs. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum.  The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc.  The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe rotor and hat have a floating mount system, which utilizes 12 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOnce the Girodisc system is in place, simply replace the cast iron rotor when needed.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSold\/priced per pair\u003c\/span\u003e\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47260486598794,"sku":null,"price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/408mm72v__24157.jpg?v=1762351393"},{"product_id":"corvette-c7-z06-grand-sport-rear-rotors","title":"Corvette C7 Z06, Grand Sport Rear Rotors, A2-147","description":"\u003cp\u003e\u003cspan\u003eThe Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc rear rotors are approx 8.1 lbs. lighter per rotor then the stock units. 24.7 lbs. vs. 16.6 lbs. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum.  The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc.  The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOnce the Girodisc system is in place, simply replace the cast iron rotor when needed.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSold\/priced per pair\u003c\/span\u003e\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47260541091978,"sku":null,"price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/408mm72v__61055.jpg?v=1762353308"},{"product_id":"hawk-performance-hp-plus-brake-pads-front","title":"Hawk Performance HP Plus Brake Pads - Front","description":"\u003cdiv\u003e\n\u003ch2\u003eHawk Performance HP Plus\u003c\/h2\u003e\n\u003cp\u003eThe Hawk Performance HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, High-Tech friction material that was developed and manufactured for sport driving in autocross, Solo II, and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eExpert Opinion\u003c\/h2\u003e\n\u003cp\u003eHP Plus is popular with enthusiasts that are looking for excellent street performance or wanting take their car auto-crossing or to a track day and not have to worry about changing pads. The HP Plus will provide a very noticeable increase in brake torque and temperature range when compared to OEM pads. Usually recommended to beginners who have very little to no track experience and are looking for an upgrade over stock.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eHawk Performance HP Plus Compound Characteristics:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLow to Mid Temperature Range\u003c\/li\u003e\n\u003cli\u003eFade Resistant\u003c\/li\u003e\n\u003cli\u003eSmooth, Predictable Torque\u003c\/li\u003e\n\u003cli\u003eIdeal for Autocross\u003c\/li\u003e\n\u003cli\u003e100-800 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e300-600 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart Number - \u003cspan\u003eHB649N.605\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch2\u003eHawk Race Compound Chart\u003c\/h2\u003e\n\u003cdiv id=\"race-compound-chart\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/Hawk_Race_Compound_Chart.jpg?v=1616616296\" alt=\"Hawk Performance Race Compound Chart\" class=\"\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47260975988874,"sku":null,"price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/92f42ec3889356c3ec1ecb115605fb44S.jpg?v=1762356390"},{"product_id":"hawk-performance-hp-plus-brake-pads-rear","title":"Hawk Performance HP Plus Brake Pads - Rear","description":"\u003cdiv\u003e\n\u003ch2\u003eHawk Performance HP Plus\u003c\/h2\u003e\n\u003cp\u003eThe Hawk Performance HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, High-Tech friction material that was developed and manufactured for sport driving in autocross, Solo II, and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eExpert Opinion\u003c\/h2\u003e\n\u003cp\u003eHP Plus is popular with enthusiasts that are looking for excellent street performance or wanting take their car auto-crossing or to a track day and not have to worry about changing pads. The HP Plus will provide a very noticeable increase in brake torque and temperature range when compared to OEM pads. Usually recommended to beginners who have very little to no track experience and are looking for an upgrade over stock.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eHawk Performance HP Plus Compound Characteristics:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLow to Mid Temperature Range\u003c\/li\u003e\n\u003cli\u003eFade Resistant\u003c\/li\u003e\n\u003cli\u003eSmooth, Predictable Torque\u003c\/li\u003e\n\u003cli\u003eIdeal for Autocross\u003c\/li\u003e\n\u003cli\u003e100-800 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e300-600 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart Number - \u003cspan\u003eHB727N.592\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch2\u003eHawk Race Compound Chart\u003c\/h2\u003e\n\u003cdiv id=\"race-compound-chart\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/Hawk_Race_Compound_Chart.jpg?v=1616616296\" alt=\"Hawk Performance Race Compound Chart\" class=\"\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47260976840842,"sku":null,"price":181.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/92f42ec3889356c3ec1ecb115605fb44S_74a579a6-b572-4b74-8a23-a2a175a9781f.jpg?v=1762356499"},{"product_id":"motul-rbf600-brake-fluid-500ml","title":"Motul RBF600 Brake Fluid - 500mL","description":"\u003cdiv\u003e\n\u003ch2\u003eMotul RBF600 Brake Fluid\u003c\/h2\u003e\n\u003cp\u003eExtreme high performance polyglycol brake fluid. Far exceeds the standards of DOT 4. Each bottle is filled with Nitrogen, increasing shelf life and eliminating contamination while factory sealed. Extremely high dry boiling point 594F(312C) helps prevent vapor lock and brake fade during hard use, with excellent recovery time. Wet boiling point 399F(204C).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eType of Use\u003c\/h2\u003e\n\u003cp\u003eAll types of hydraulic actuated brake and clutch systems requiring a non-silicone synthetic fluid. Specially designed to resist to high temperature of racing actuated brake (steel or carbon) and clutch systems. Exceeds DOT 5.1 and DOT 3 standards also, except for viscosity at -40degC (-40degF).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003ePerformance\u003c\/h2\u003e\n\u003cp\u003eStandards: FMVSS 116 DOT 4 \/ SAE J 1703 \/ ISO 4925\u003c\/p\u003e\n\u003ch3\u003eExtreme thermal resistance and stability\u003c\/h3\u003e\n\u003cp\u003eThe very high boiling point (312degC \/ 594degF), superior to conventional DOT 5.1 non silicone base \/ DOT 5 silicone base fluids (260degC \/ 500degF mini) and DOT 4 (230degC \/ 446degF mini) enables an effective brake even under extreme conditions.\u003c\/p\u003e\n\u003ch3\u003eEfficient when rainy\u003c\/h3\u003e\n\u003cp\u003eThe very high wet boiling point (204degC \/ 399degF) superior to conventional DOT 5.1 non-silicone base fluid (180degC \/ 356degF mini) and DOT 4 (155degC \/ 311degF mini) enables to keep an efficient brake system when rainy. Indeed, DOT 3, DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity in the air, which reduces their boiling points and increases the risk to get to vapor lock phenomena. The wet boiling point is measured by humidifying the product with about 3.5 percent of water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eRecommendations\u003c\/h2\u003e\n\u003cp\u003eAvoid mixing with polyglycols based brake fluid with lower performances. Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM). Store brake fluid in its original container, tightly closed to prevent absorption of moisture. Aggressive chemical product if contact with hands, paint or varnish. If skin contact, rinse thoroughly with water.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47260982018186,"sku":null,"price":19.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/600_73a7e6c6-8a99-4f05-b7c8-3aa836832654.webp?v=1762360120"},{"product_id":"hawk-performance-dtc-70-brake-pads-front","title":"Hawk Performance DTC-70 Brake Pads - Front","description":"\u003cdiv\u003e\n\u003ch2\u003eHawk Performance DTC-70\u003c\/h2\u003e\n\u003cp\u003eThe Hawk DTC-70 race compound was engineered with extremely high torque and highly aggressive initial bite for cars with high deceleration rates, with or without downforce. With superior release and control characteristics, it's a winning race solution on its own or as split friction with DTC-60.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eExpert Opinion\u003c\/h2\u003e\n\u003cp\u003eDTC-70 is more aggressive than the DTC-60 but has the same temperature range. Many racers of Corvettes, Mustangs, Porsches, BMWs and other specialty race cars choose to run DTC-70 Front and DTC-60 rear. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eHawk Performance DTC-70 Race Compound Characteristics:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Performance\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eSuperior Rotor and Pad Wear\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart Number - \u003cspan\u003eHB649U.605\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch2\u003eHawk Race Compound Chart\u003c\/h2\u003e\n\u003cdiv id=\"race-compound-chart\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/Hawk_Race_Compound_Chart.jpg?v=1616616296\" alt=\"Hawk Performance Race Compound Chart\" class=\"\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47261014392970,"sku":null,"price":439.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/d414d2d26756353e3eb01e7b3cf831cbL_ec97502c-fe7e-46f5-8bfc-9e2aa19c50bc.webp?v=1762359861"},{"product_id":"hawk-performance-dtc-60-brake-pads-rear","title":"Hawk Performance DTC-60 Brake Pads - Rear","description":"\u003cdiv\u003e\n\u003ch2\u003eHawk Performance DTC-60\u003c\/h2\u003e\n\u003cp\u003eRunning with extremely high deceleration rates and increased downforce poses different challenges, so Hawk designed DTC-60 race compound. Recommended with DTC-70 when split friction between axles is desired, it has excellent modulation and release characteristics.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eExpert Opinion\u003c\/h2\u003e\n\u003cp\u003eDTC-60 has the same temperature range as DTC-70, but produces less brake torque. Many racers of lighter, smaller cars such as the Miata and S2000 will run DTC-60 Front and DTC-30 Rear. On larger, heavier, cars such as Corvettes, Mustangs, Porsches, BMWs and other specialty race cars, the DTC-60 is run on the rear with DTC-70 up front. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eHawk Performance DTC-60 Race Compound Characteristics:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Release and Torque Control\u003c\/li\u003e\n\u003cli\u003eVery Low Pad and Rotor Wear\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003cli\u003eExcellent Modulation and Release Characteristics\u003c\/li\u003e\n\u003cli\u003eApplicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks\u003c\/li\u003e\n\u003cli\u003eStable Friction Output\u003c\/li\u003e\n\u003cli\u003e400-1600 Deg F Operating Temperature Range\u003c\/li\u003e\n\u003cli\u003e600-1200 Deg F Optimal Temperature Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart Number - \u003cspan\u003eHB727G.592\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch2\u003eHawk Race Compound Chart\u003c\/h2\u003e\n\u003cdiv id=\"race-compound-chart\"\u003e\u003cimg alt=\"Hawk Performance Race Compound Chart\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0047\/8865\/0055\/files\/Hawk_Race_Compound_Chart.jpg?v=1616616296\" class=\"\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47261015900298,"sku":null,"price":279.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/hawk-performance-corvette-dtc-60-brake-pads-12-piece-front-pair-hb531g570.CV2928.jpg?v=1762359933"},{"product_id":"corsa-carbon-fiber-air-intake-6-2l-v8-chevrolet-corvette-c7-2014-2019","title":"CORSA Carbon Fiber Air Intake 6.2L V8 Chevrolet Corvette C7 2014-2019","description":"\u003cdiv class=\"vr-content\"\u003e\n\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eCorsa Performance Exhaust System for 2014-2019 C7 Corvette (Part No. 44001D)\u003c\/h2\u003e\n\u003cp\u003eUpgrade your C7 Corvette with the Corsa Performance Exhaust System (44001D), designed specifically for the 2014-2019 models. This exhaust system is crafted to enhance both the sound and performance of your vehicle, giving it a sporty edge that turns heads wherever you go.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance Boost:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eExperience an increase of up to 15 horsepower and 15 lb-ft of torque from your LT-1 engine, all without the need for a tune.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistinctive Sound:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe Corsa exhaust system is engineered to deliver a deep, aggressive sound that resonates with performance enthusiasts, especially in the sport and extreme versions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMade from high-quality materials, this exhaust is built to last while withstanding the rigors of high-performance driving.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe direct bolt-on design means you can install the system in just minutes, making upgrades hassle-free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBacked by a Limited Lifetime Warranty for the original purchaser, ensuring peace of mind with your investment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e44001D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2014-2019 C7 Corvette\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter Options:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eChoose between oiled MaxFlow 5 or non-oiled DryTech filters for optimized performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePolished stainless steel for a sleek, eye-catching look.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCustomer Insights\u003c\/h3\u003e\n\u003cp\u003eMany Corvette owners have shared their excitement about the Corsa Exhaust System, noting how it enhances the driving experience with a powerful sound and noticeable performance improvement. Users appreciate the ease of installation and the quality of materials that Corsa is known for.\u003c\/p\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWARNING: CA Proposition 65 - Cancer and Reproductive Harm - www.P65Warnings.ca.gov\u003c\/li\u003e\n\u003cli\u003eFor use with Filter PN [5165D]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eOther Part Numbers:\u003c\/b\u003e\u003cbr\u003eCorsa #cor44001D\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47270505382026,"sku":null,"price":996.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/44001D_A.webp?v=1762463833"},{"product_id":"afe-power-momentum-intake-system-pro-dry-s-chevrolet-corvette-c7-v8-6-2l-2014","title":"aFe Power Momentum Intake System Pro Dry S Chevrolet Corvette C7 V8 6.2L 2014","description":"\u003cdiv class=\"vr-content\"\u003eaFe is proud to introduce the all new Momentum sealed intake system. This all new Momentum intake system resulted in 18 horsepower and 22 lbs. x ft. torque and outflows the factory intake by 42%. This system is superior in every way, from the one-piece sealed housing, to the massive air filter, roto-molded tube w\/ built-in resonance chamber and premium hardware. This system uses a CAD designed, dyno-tuned, roto-molded intake tube \u0026amp; housing to achieve maximum power gains while maintaining a perfect fit. This is a direct bolt-on kit and requires no cutting or drilling on OEM parts. The one-piece sealed housing is used to eliminate the use of multiple components and ensure the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene and mounts directly into the factory location on the fender well to capture the coolest air available from the factory intake tract. This system uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has a built-in resonance chamber to catch un-wanted air intake noises. Two billet aluminum fittings are mounted on the tube to provide a perfect connection with the factory vacuum lines. This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive 7\" oval flange and is 9-1\/2\" tall Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressively finer mesh synthetic \"oil-free\" media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium stainless steel T-bolt clamps and a reinforced silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation. After a rigorous design and testing phase, the results are in. The Momentum air intake system outflowed the factory intake by 42% and resulted in 18 additional horsepower and 22 lbs. x ft. torque. Power, Protection and Simplicity.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eUnique One-Piece Housing with Sight Window\u003c\/li\u003e\n\u003cli\u003eRoto-molded Tube\u003c\/li\u003e\n\u003cli\u003e7\" oval flange and 9-1\/2\" tall Pro Dry S filter media\u003c\/li\u003e\n\u003cli\u003ePremium Hardware\u003c\/li\u003e\n\u003cli\u003eUp to 18 horsepower and 22 lbs. x ft. torque gains\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Corvette V8 6.2L (C7) 2014\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eThis intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eOther Part Numbers:\u003c\/b\u003e\u003cbr\u003eAFE #afe51-74201\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47270510985354,"sku":null,"price":462.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/51-74201.webp?v=1762464020"},{"product_id":"lg-motorsports-1-3-4-to-1-7-8-super-pro-long-tube-headers-x-pipe-for-2014-2019-corvette-c7","title":"LG Motorsports 1 3\/4\" to 1 7\/8\" Super Pro Long Tube Headers \u0026 X-Pipe for 2014-2019 Corvette C7","description":"\u003ch2\u003eExperience Unmatched Performance with LG Motorsports Super Pro Headers for C7 Corvettes\u003c\/h2\u003e\n\u003cp\u003eIf you're a proud owner of a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e2014-2019 Chevrolet Corvette Stingray\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eC7 Z06\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eC7 Grand Sport\u003c\/strong\u003e, or\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eC7 ZR1\u003c\/strong\u003e, it's time to elevate your ride with the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eLGC7SPSMM Super Pro Headers\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efrom LG Motorsports. These headers have been rigorously tested in competitive environments like the Corvette Challenge Series and the American Le Mans GT2 division, proving their reliability and performance on the track.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose LG Motorsports Super Pro Headers?\u003c\/h3\u003e\n\u003cp\u003eDesigned for serious performance enthusiasts, these headers are crafted from high-quality 304 stainless steel with a mandrel bent construction. The innovative\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1 3\/4 to 1 7\/8 stepped design\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emaximizes exhaust flow, pushing your LT1 engine to deliver torque figures that leave the competition in the dust. With true race-style 3-inch merge collectors, you can expect enhanced scavenging, resulting in more low-end torque and impressive peak horsepower.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes new GM gaskets for a perfect seal\u003c\/li\u003e\n\u003cli\u003eComes with O2 extension wires and five O2 bungs (four OEM and one for a wide-band sensor)\u003c\/li\u003e\n\u003cli\u003eHigh-flow siamese style X-pipe for optimal exhaust flow\u003c\/li\u003e\n\u003cli\u003eUtilizes OEM hangers for easy installation\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty for the original owner\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with a slip-fit design for hassle-free setup\u003c\/li\u003e\n\u003cli\u003eLG's renowned merge collector with fire cone ensures smooth exhaust flow\u003c\/li\u003e\n\u003cli\u003eCatted system includes off-road pipes for performance enthusiasts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Corvette C7 Grand Sport (2017-2019)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette C7 Z06 (2014-2019)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette C7 ZR1 (2019)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette C7 Stingray (2014-2019)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReal-World Performance\u003c\/h3\u003e\n\u003cp\u003eOwners of these headers have reported significant improvements in their Corvette's performance. For instance, a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e2017 Corvette Grand Sport owner\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003enoted, \"After installing the Super Pro headers, I felt a noticeable boost in torque right off the line, making my driving experience more exhilarating than ever!\"\u003c\/p\u003e\n\u003cp\u003eWhether you're hitting the track or just enjoying a spirited drive on the backroads, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eLGC7SPSMM Super Pro Headers\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewill transform your C7 Corvette into a true torque monster. Don't settle for less; equip your ride with the best and feel the difference!\u003c\/p\u003e\n\u003cp\u003ePart Number - \u003cspan\u003eLGC7SPSMM\u003c\/span\u003e\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47270534611082,"sku":null,"price":2731.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/LGMotoLGC7SPSMM4th.webp?v=1762464783"},{"product_id":"awe-tuning-touring-edition-axle-back-exhaust-3-diameter-4-5-quad-diamond-black-tips-chevrolet-corvette-grand-sport-corvette-stingray-corvette-z51-corvette-z06-corvette-zr1-2014-2019","title":"AWE Tuning Touring Edition Axle Back Exhaust | 3\" Diameter | 4.5\" Quad Diamond Black Tips Chevrolet Corvette Grand Sport |Corvette Stingray |Corvette Z51|Corvette Z06|Corvette ZR1 2014-2019","description":"\u003ch2\u003eAWE Tuning 3015-43143 Touring Edition Axleback Exhaust\u003c\/h2\u003e\n\u003cp\u003eTransform your driving experience with the AWE Tuning 3015-43143 Touring Edition Axleback Exhaust, designed specifically for the Chevrolet Corvette models from 2014 to 2019, including the Grand Sport, Stingray, Z06, Z51, and ZR1. This exhaust system features a straight-through design crafted from 3\" T304L stainless steel, ensuring durability and performance. With AWE's proprietary 180 Technology, you’ll enjoy a rich, aggressive sound that’s free from cabin drone during cruising, allowing you to unleash the full potential of your 6.2L engine when you hit the throttle.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes AWE AFM Valve Simulators for AFM-equipped vehicles, ensuring compatibility with Corvette Stingray \/ Z51 Auto \/ Z51 Manual (2014-2016) and Grand Sport Auto.\u003c\/li\u003e\n\u003cli\u003eBacked by the AWE Lifetime Exhaust Warranty.\u003c\/li\u003e\n\u003cli\u003ePerfect fitment guaranteed with no check engine light issues.\u003c\/li\u003e\n\u003cli\u003eSignificant weight savings over the stock exhaust system.\u003c\/li\u003e\n\u003cli\u003eClean, non-baffled, straight-through design maximizes performance and sound.\u003c\/li\u003e\n\u003cli\u003eQuad 4.5” double-walled tips available in chrome silver or diamond black, providing a sleek look.\u003c\/li\u003e\n\u003cli\u003eHandcrafted from U.S.-sourced, CNC mandrel-bent .065-inch wall T304L stainless steel.\u003c\/li\u003e\n\u003cli\u003ePeak gains of 18 hp and 16 lb-ft of torque, with max gains of 22 hp at 6400 rpm and 20 lb-ft at 4000 rpm at the wheels.\u003c\/li\u003e\n\u003cli\u003eEngineered with AWE's 180 Technology to deliver muscle without the drone.\u003c\/li\u003e\n\u003cli\u003eProudly designed and manufactured in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Corvette Grand Sport (2014-2019)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette Stingray (2014-2019)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette Z06 (2014-2019)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette Z51 (2014-2016)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette ZR1 (2019)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart Number - \u003cspan\u003e3015-43143\u003c\/span\u003e\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47270536675466,"sku":null,"price":1650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/3015-43143_1.webp?v=1762465115"},{"product_id":"awe-tuning-track-edition-axle-back-exhaust-3-diameter-4-5-quad-diamond-black-tips-chevrolet-corvette-grand-sport-corvette-stingray-corvette-z51-corvette-z06-corvette-zr1-2014-2019","title":"AWE Tuning Track Edition Axle Back Exhaust | 3\" Diameter | 4.5\" Quad Diamond Black Tips Chevrolet Corvette Grand Sport |Corvette Stingray |Corvette Z51|Corvette Z06|Corvette ZR1 2014-2019","description":"\u003cp\u003eIf you're on the hunt for an exhaust that really makes a statement, the AWE Track Edition Axle Back is where it’s at. This setup is all about raw sound and lightweight performance. Crafted from 3\" diameter T304L stainless steel, it’s built to last while delivering that aggressive growl you crave. Forget about the baffles and restrictions; this bad boy has straight pipe sections that let your engine's voice be heard loud and clear. Just a heads up—this isn’t for folks who want a whisper; it’s for those who want to turn heads and maybe even rattle a few windows.\u003c\/p\u003e\n\u003cp\u003eOne cool thing about the Track Edition is that it mirrors the precision fitment of the Touring Edition but ditches the 180 Technology for a more straightforward, no-nonsense approach. And if you find it’s a bit too loud for your taste, AWE has you covered with conversion kits to swap it out for the Touring Edition. Super simple!\u003c\/p\u003e\n\u003cp\u003eNow, let’s talk about the technical side. This exhaust is designed for specific Corvette models, including the Grand Sport, Stingray, Z51, Z06, and ZR1 from 2014 to 2019. If you’re rolling with an AFM-equipped car, you’ll appreciate the included AFM Valve Simulators. They make sure you can run this full axle-back setup without throwing a check engine light, which is a huge relief. Just bolt the simulators onto your factory AFM valve motors, and you’re good to go.\u003c\/p\u003e\n\u003cp\u003eThe exhaust tips are 4.5\" slash-cut, available in either Chrome Silver or Diamond Black, and they come with the AWE logo. They’re double-walled, so you won’t have to worry about them losing their shine even when you’re pushing the limits. Plus, you can adjust how deep they sit in the bumper to match your personal style.\u003c\/p\u003e\n\u003cp\u003eOn the performance side, you’re looking at some impressive gains—up to 18 hp and 16 lb-ft of torque, with max gains hitting 22 hp at 6400 rpm and 20 lb-ft at 4000 rpm at the wheels. That’s some serious muscle for your ride!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAWE Lifetime Exhaust Warranty—because we stand by our products.\u003c\/li\u003e\n\u003cli\u003ePerfect Fitment—no guesswork here.\u003c\/li\u003e\n\u003cli\u003eNo Check Engine Light—guaranteed!\u003c\/li\u003e\n\u003cli\u003eSignificant weight savings over stock exhaust.\u003c\/li\u003e\n\u003cli\u003eClean, non-baffled, straight-through design for max performance.\u003c\/li\u003e\n\u003cli\u003e4.5 inch double-walled tips in Chrome Silver or Diamond Black.\u003c\/li\u003e\n\u003cli\u003eHandcrafted from 3 inch U.S.-sourced CNC mandrel-bent .065 inch wall T304L stainless steel.\u003c\/li\u003e\n\u003cli\u003ePeak gains of 18 hp and 16 lb-ft of torque; max gains of 22 hp at 6400 rpm and 20 lb-ft at 4000 rpm.\u003c\/li\u003e\n\u003cli\u003eIncluded AWE AFM Valve Simulators for AFM-equipped vehicles.\u003c\/li\u003e\n\u003cli\u003eProudly engineered, designed, and manufactured in-house, in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Corvette Grand Sport 2014-2019\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette Stingray 2014-2019\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette Z51 2014-2016\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette Z06 2015-2019\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette ZR1 2019\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart Number - \u003cspan\u003e3020-43081\u003c\/span\u003e\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47270537330826,"sku":null,"price":1135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/3020-43081_1.webp?v=1762465250"},{"product_id":"omp-racing-hte-r-400-seat-black","title":"OMP Racing HTE-R 400 Seat Black","description":"\u003cdiv class=\"vr-content\"\u003eOMP racing seats are designed and manufactured in compliance with the strictest international standards and are subjected to numerous tests. Also renewed aesthetics with new coatings, the range of OMP seats offers a wide use for all types of vehicle (rally, road, offroad, karts etc. ..).\u003cbr\u003e\u003cbr\u003eRacing seat in gel coated fiberglass shell. Large shoulder harness slots to accommodate varios heights. Medium heigth side bolsters for lateral leg support. Removable back, base and leg cushion for maximum individual seating comfort. Upholstered entirely in high breathability AIRTEX material. Upholstered customized on demand. HANS and HSC PATENT (HC\/893) compatible. ESPECIALLY FOR CARS WITH SMALL SPACE IN THE UPPER PART.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eShell: Fiberglass\u003c\/li\u003e\n\u003cli\u003eFixing: W side\u003c\/li\u003e\n\u003cli\u003eHole: 5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eOther Part Numbers:\u003c\/b\u003e\u003cbr\u003eOMP Racing \u003cspan\u003eHA0-0780-B01-071\u003c\/span\u003e\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47270547357834,"sku":null,"price":1059.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/HA.780E.N.webp?v=1762465616"},{"product_id":"racequip-large-fia-containment-racing-seat","title":"Racequip Large FIA Containment Racing Seat","description":"\u003cdiv class=\"vr-content\"\u003eRaceQuip FIA Certified Full Containment Composite Racing Seats provide the support to hold you firmly in place for increased car control. This seat is certified to FIA 8855-1999 specifications with FIA hologram affixed. The design is suitable for professional racing with its increased thigh and hip support along with extended shoulder and rib bolsters for extra containment. The halo protrusions at the top provide additional head support in the case of a side impact which is why this seat is considered Full Containment. The shell is a one-piece lightweight, FRP hand-laid composite structure built for strength and durability. The design accommodates all Head and Neck restraints and there are five seat belt guides to handle 4, 5 or 6-point harness sets. The seat bottom and back cushions incorporate energy absorbing memory foam for comfort and safety. The seat material is a black mesh fabric for increased breathability with a more durable smooth covering in high-wear areas. The exposed areas of the shell are a shiny black gelcoat for a great look and easier cleaning. There are four built-in 8mm side mount threaded fasteners (brackets not included). Optional RaceQuip brackets allow the seat mounting to go from 0deg Upright position to 30deg Layback position. Seats weigh about 23 lbs.\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003eFeatures:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eOne-Piece Lightweight FRP Composite Shell\u003c\/li\u003e\n\u003cli\u003ePro Racing Design With Extra Tall Thigh and Hip Support\u003c\/li\u003e\n\u003cli\u003eIntegral Shoulder and Rib Bolsters\u003c\/li\u003e\n\u003cli\u003eFull Containment Right and Left Head Support Halo\u003c\/li\u003e\n\u003cli\u003eAccommodates All Head and Neck Restraint Devices\u003c\/li\u003e\n\u003cli\u003eFive Seat Belt Guides Handle 4, 5 or 6-point Harnesses\u003c\/li\u003e\n\u003cli\u003eEnergy Absorbing Memory Foam Back and Seat Cusions\u003c\/li\u003e\n\u003cli\u003eBlack Mesh Fabric Cover for Breathability\u003c\/li\u003e\n\u003cli\u003eFour Built-in 8mm Mounting Lugs With Bolts\u003c\/li\u003e\n\u003cli\u003eShiny Black Gelcoat Finish on Exposed Areas\u003c\/li\u003e\n\u003cli\u003eOptional RaceQuip Seat Mount Brackets Allow 0deg to 30deg Layback\u003c\/li\u003e\n\u003cli\u003eWeighs Approximately 23lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eOther Part Numbers:\u003c\/b\u003e\u003cbr\u003eRacequip #rqp96995599\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47270552273034,"sku":null,"price":979.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/96995599.webp?v=1762465861"},{"product_id":"sparco-circuit-ii-qrt-black-seat","title":"Sparco Circuit II QRT Black Seat","description":"\u003cdiv class=\"vr-content\"\u003e\n\u003ch2\u003eCircuit II QRT: The Perfect Seat for Circuit Racing\u003c\/h2\u003e\n\u003cp\u003eMeet the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCircuit II QRT\u003c\/strong\u003e, a wider version of our popular Circuit seat, crafted specifically for those serious about circuit racing. This ultra-light competition seat is designed to provide comfort and safety while you push your limits on the track.\u003c\/p\u003e\n\u003ch3\u003eInnovative Design for Every Driver\u003c\/h3\u003e\n\u003cp\u003eConstructed from aramid fiber-reinforced fiberglass and featuring our cutting-edge QRT Technology, the Circuit II QRT offers a broader shell to accommodate larger drivers. It's not just about size; this seat comes with integrated head bolsters to keep your head protected, along with deep side bolsters that ensure maximum lateral support. Plus, it’s compatible with a Hans device for that extra layer of safety.\u003c\/p\u003e\n\u003ch3\u003eLightweight and Durable\u003c\/h3\u003e\n\u003cp\u003eThe ultra-light shell is wrapped in a fire-retardant fabric that not only enhances safety but also helps keep you securely in place during those high-speed turns. And yes, the Circuit II QRT is FIA approved, giving you peace of mind on the track.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose QRT Technology?\u003c\/h3\u003e\n\u003cp\u003eWhat sets our QRT Technology apart is its incredible strength-to-weight ratio. You’ll enjoy an average weight savings of 30% compared to standard fiberglass racing seats. This means you get the lightweight feel of a carbon fiber seat without the hefty price tag.\u003c\/p\u003e\n\u003ch4\u003eKey Features:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eQRT Technology - 30% weight savings\u003c\/li\u003e\n\u003cli\u003eDesigned for larger drivers\u003c\/li\u003e\n\u003cli\u003eUltra-light aramid fiber-reinforced fiberglass shell\u003c\/li\u003e\n\u003cli\u003eIntegrated head bolsters for enhanced safety\u003c\/li\u003e\n\u003cli\u003eCompatible with Hans device\u003c\/li\u003e\n\u003cli\u003eFire-retardant fabric\u003c\/li\u003e\n\u003cli\u003eFIA approved\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGet ready to take your racing experience to the next level with the Circuit II QRT. Comfort, safety, and performance all come together in one incredible seat!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eOther Part Numbers:\u003c\/b\u003e\u003cbr\u003eSparco #spa008011RNR\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47270553878666,"sku":null,"price":1129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/Sparco_008011RNR.webp?v=1762466022"},{"product_id":"girodisc-d1-147-2-piece-front-rotor-ring-replacement-for-chevrolet-corvette-c7-z06-grand-sport","title":"Girodisc D1-147 2 Piece Front Rotor Ring Replacement for Chevrolet Corvette C7 Z06 Grand Sport","description":"\u003cp\u003eIf you're rocking Girodisc 2-piece rotors on your C7 Corvette Z06 or Grand Sport, and those rings are starting to show their age, we’ve got just what you need. Our replacement rings are not just parts; they come with all the new hardware you’ll need and straightforward instructions to get you back on the road in no time.\u003c\/p\u003e\n\u003cp\u003eBut hey, if you're not feeling up to the re-assembly, we’ve got your back. Just send us your rotor hats, and we’ll take care of the re-assembly and turning for you. All you’ll pay is the shipping. This service is available for the entire life of your rotors, so you can keep your braking performance top-notch without breaking a sweat.\u003c\/p\u003e\n\u003ch3\u003eFitments:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Corvette C7 Z06 \u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette Grand Sport (2017-2019)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrice is for a PAIR of rings and includes 2 hardware kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith these replacement rings, you’re not just getting a part; you're enhancing your braking system's performance. The Girodisc rotors are designed for those who demand precision and reliability, and with our rings, you can keep that performance alive. Whether you're hitting the track or just cruising, you’ll appreciate the improved bite and fade resistance these rings provide.\u003c\/p\u003e\n\u003cp\u003eSo, if you’re ready to keep your Corvette’s stopping power at its peak, grab a set of our replacement rings and get back to enjoying the drive!\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47270575276170,"sku":null,"price":880.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/Girodisc-D1-015-main.webp?v=1762466570"},{"product_id":"girodisc-d2-147-2-piece-380mm-rear-rotor-ring-replacement-for-chevrolet-c7-z06-grand-sport","title":"Girodisc D2-147 2 Piece 380mm Rear Rotor Ring Replacement for Chevrolet C7 Z06 | Grand Sport","description":"\u003ch2\u003eUpgrade Your Girodisc 2-Piece Rotors with New Rings\u003c\/h2\u003e\n\u003cp\u003eIf you're looking to refresh your Girodisc 2-piece rotors, we've got just the thing you need! Our replacement rings are designed specifically for your\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eChevrolet Corvette Z06 (2014-2020)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eGrand Sport (2017-2020)\u003c\/strong\u003e. Each set comes complete with new hardware and detailed instructions for easy re-assembly. This means you can get your brakes back in action without any hassle.\u003c\/p\u003e\n\u003cp\u003eFor those who prefer a hands-off approach, you can send us your rotor hats, and we’ll take care of the re-assembly and turning for just the cost of shipping. This service is available for the entire lifespan of your rotors, ensuring you get the most out of your investment.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Corvette Z06 (2014-2020)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette Grand Sport (2017-2020)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 Pair of replacement rings\u003c\/li\u003e\n\u003cli\u003e2 Hardware kits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe price listed is for a complete pair of rings and hardware kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Choose Girodisc?\u003c\/h3\u003e\n\u003cp\u003eGirodisc rotors are known for their performance and durability, making them a popular choice among Corvette owners. By replacing just the rings, you can extend the life of your rotors and maintain optimal braking performance without the need for a full rotor replacement.\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47270614565002,"sku":null,"price":730.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/Girodisc-D1-015-main_6ceaa92b-29de-4897-b1ab-1120463e74af.webp?v=1762467147"},{"product_id":"lg-motorsports-brake-cooling-kit-for-chevrolet-corvette-c7-z06-2014-2020-dual-hose-design","title":"LG Motorsports Brake Cooling Kit for Chevrolet Corvette C7 Z06 2014-2020, Dual Hose Design","description":"\u003ch2\u003eLG7BC Duct Kit by LG Motorsports\u003c\/h2\u003e\n\u003cp\u003eIf you're a proud owner of a 2014-2020 Chevrolet Corvette C7 Z06, you know that performance is key, especially when you're pushing your car on the track. The LG7BC Duct Kit from LG Motorsports is engineered with the spirit of racing in mind, having been developed from extensive testing in the Corvette Challenge Series, Trans Am, Grand Am Series, World Challenge, and the American Le Mans GT2 division. This isn't just another upgrade; it's a proven solution for keeping your brakes cool under pressure.\u003c\/p\u003e\n\u003ch3\u003ePerformance-Driven Design\u003c\/h3\u003e\n\u003cp\u003eAfter countless hours of track testing with the C7, LG Motorsports recognized the need for enhanced brake cooling, especially when even high-end carbon brakes were struggling to keep up. Enter the LG7BC Duct Kit, a comprehensive solution designed to optimize airflow directly to your brake rotors. This kit features a robust 3-inch hose that channels air straight to the rotor and a secondary 2-inch hose that targets the rear of the rotor and caliper, ensuring that your brakes stay cool even during the most intense sessions.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber inner duct with dual outlets for maximum airflow\u003c\/li\u003e\n\u003cli\u003e3-inch hose directs air to the rotor for efficient cooling\u003c\/li\u003e\n\u003cli\u003e2-inch hose provides additional cooling to the rotor and caliper\u003c\/li\u003e\n\u003cli\u003eDurable aluminum spindle plate with dual inlets\u003c\/li\u003e\n\u003cli\u003eEasy bolt-on installation—no need to remove wheel bearings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Corvette C7 Z06: 2014-2020\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cp\u003eFor C7 Z06 owners who don't have the factory front ducts, you'll need to grab the C7Z nose duct pieces, which are available through LG Motorsports. This ensures a straightforward bolt-on installation that won't require any major modifications.\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47270665748618,"sku":null,"price":1295.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/LGMotoLG7BC.webp?v=1762467327"},{"product_id":"kooks-1-7-8-inch-stainless-steel-header-and-green-connection-kit-chevrolet-corvette-c7-lt1-lt4-lt5-6-2l-2014-2019","title":"Kooks 1-7\/8 Inch Stainless Steel Header and Green Connection Kit Chevrolet Corvette C7 LT1\/LT4\/LT5 6.2L 2014-2019","description":"\u003cdiv class=\"vr-content\"\u003e\n\u003ch2\u003eKooks 1-7\/8 Inch Stainless Steel Header and Green Connection Kit Chevrolet Corvette C7 LT1\/LT4\/LT5 6.2L 2014-2019\u003c\/h2\u003e\n\u003cp\u003eBased on 2170H430 and Kooks, this system includes 1-7\/8\" x 3\" Stainless Steel Long Tube Headers \u0026amp; 3\" x 2-3\/4\" (OEM) Green Catted Stainless X-Pipe. Connects to 2-3\/4\" OEM Style Exhaust.\u003c\/p\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured In The USA. Kooks Uses T304 Aircraft Quality Stainless Steel. Kooks Products are Backed by a Limited Lifetime Warranty To the Original Purchaser. Kooks Products Are Dyno And Race Tested and Designed For Maximum Power.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Corvette C7 LT1\/LT4\/LT5 6.2L 2014-2019\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKooks 2170H430 Performance\u003c\/h2\u003e\n\u003ch3\u003eConnection Kit 2170H430 Details\u003c\/h3\u003e\n\u003cp\u003eThis Kooks system is specifically designed for the Chevrolet Corvette C7 LT1\/LT4\/LT5 6.2L from 2014-2019, ensuring a perfect fit and optimal performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eOther Part Numbers:\u003c\/b\u003e\u003cbr\u003eKooks #ksh2170H430\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47282934841482,"sku":null,"price":3657.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/21702400_0-FLRQ.webp?v=1762527390"},{"product_id":"borla-2014-2019-chevrolet-corvette-stingray-c7-grand-sport-c7-z06-c7-x-pipe","title":"Borla 2014-2019 Chevrolet Corvette Stingray C7\/ Grand Sport C7\/ Z06 C7 X-Pipe","description":"\u003cdiv class=\"vr-content\"\u003e\n\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eBORLA 60548 Exhaust X-Pipe for C7 Corvettes\u003c\/h2\u003e\n\u003cp\u003eUpgrade your C7 Corvette—whether it's a Stingray, Grand Sport, or Z06—with the BORLA 60548 2.75\" diameter Merge X-Pipe. This exceptional exhaust component is designed to fit seamlessly with or without Active Fuel Management (AFM) and NPP valves, making it versatile for various configurations.\u003c\/p\u003e\n\u003ch3\u003eKey Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCrafted from premium T-304 austenitic stainless steel, this X-Pipe offers superior performance and durability compared to standard T-400 series materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe ultra-smooth mandrel bends promote maximum exhaust flow, enhancing engine performance and creating a more aggressive sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eManufactured using advanced CNC technology for an accurate fit, ensuring easy installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEnjoy peace of mind with the BORLA Million-Mile Warranty, a testament to the quality of this product.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSound Enhancement:\u003c\/h3\u003e\n\u003cp\u003eExperience a significant change in your Corvette's exhaust note. The BORLA X-Pipe delivers a deep, throaty growl that enhances the driving experience without being overly aggressive, making it perfect for both daily driving and spirited outings.\u003c\/p\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Type:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eT-304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCompatible with all C7 Corvette models including Stingray, Grand Sport, and Z06\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCustomer Feedback:\u003c\/h3\u003e\n\u003cp\u003eUsers have praised the 60548 for its perfect fit and noticeable sound improvement. Many report an exhilarating driving experience, with the X-Pipe complementing their BORLA axle-back systems beautifully. It's a popular choice for those looking to enhance both performance and auditory pleasure.\u003c\/p\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward, especially for those familiar with exhaust systems. The precise fit ensures minimal hassle, allowing you to enjoy your upgraded exhaust in no time.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eOther Part Numbers:\u003c\/b\u003e\u003cbr\u003eBorla Exhaust #bor60548\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47282969411722,"sku":null,"price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/Borla_60548_1.webp?v=1762527768"},{"product_id":"lg-motorsports-full-control-arm-monoball-kit-for-chevrolet-corvette-c5-c6-c7-1997-2019","title":"LG Motorsports Full Control Arm Monoball Kit for Chevrolet Corvette C5|C6|C7 1997-2019","description":"\u003cp\u003eWHEN ORDERING, PLEASE MESSAGE US AND LET US KNOW YEAR OF YOUR CORVETTE\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eLG Motorsports Monoball Control Arm Kit (LGMBK)\u003c\/h2\u003e\n\u003cp\u003eIf you're a proud owner of a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eChevrolet Corvette\u003c\/strong\u003e, you know that precision and performance are key to unlocking the full potential of your ride. The\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eLG Motorsports Monoball Control Arm Kit (LGMBK)\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis designed specifically for enthusiasts looking to enhance their vehicle's handling and stability on the track or the street. This kit has been tested in high-stakes racing environments like the\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eCorvette Challenge Series\u003c\/em\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eTrans Am\u003c\/em\u003e, and\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eAmerican Le Mans GT2 division\u003c\/em\u003e, ensuring that you receive a product that’s proven to perform.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose the LGMBK?\u003c\/h3\u003e\n\u003cp\u003eBy upgrading to the LGMBK, you're investing in a solution that eliminates the common issues associated with factory control arms. Say goodbye to deflection under load and erratic toe changes that can make your Corvette feel unpredictable on the track. The LGMBK allows for smooth and precise pivoting of the control arms, providing a more stable and confident driving experience.\u003c\/p\u003e\n\u003ch3\u003eFeatures at a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Quality Components:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe kit includes stainless steel balls with Teflon-lined races, ensuring durability and long-lasting performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUnlike other kits that require messy adhesives, the LGMBK is engineered for a precise press fit, making installation straightforward for home mechanics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Kit:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis package covers all 8 control arms and comes with pre-assembled bearings, retaining clips, spacers, and detailed instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Made Simple\u003c\/h3\u003e\n\u003cp\u003eWhether you're a seasoned DIYer or a weekend warrior, installing the LGMBK can be done at home with basic tools. If you prefer, LG Motorsports can handle the installation for you. \u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eThis kit is compatible with the following Chevrolet Corvette models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Corvette C5 (1997-2004)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette C6 (2005-2013)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette C6 Z06 (2006-2013)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette C6 ZR1 (2009-2013)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette C6 Grand Sport (2010-2013)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette C7 Grand Sport (2017-2019)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette C7 Z06 (2014-2019)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette C7 ZR1 (2019)\u003c\/li\u003e\n\u003cli\u003eChevrolet Corvette C7 Stingray (2014-2019)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47282985173130,"sku":null,"price":2490.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/LGMotoLGMBK2nd.webp?v=1762528024"},{"product_id":"lg-motorsports-rear-hd-tie-rods-with-aurora-heim-upgrade-for-chevrolet-corvette-c7-2014","title":"LG Motorsports Rear HD Tie Rods with Aurora Heim Upgrade for Chevrolet Corvette C7 2014+","description":"\u003cdiv class=\"vr-content\"\u003e\n\u003cp\u003eIf you’ve ever wrestled with the factory C7 tie rods, you know they can be a real pain. Aligning them is like trying to herd cats, and let’s not even get started on how they tend to slip or deflect when you really need them to hold steady. That’s where the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eLG Rear HD Tie Rod Kit\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esteps in, and trust me, it’s a game changer.\u003c\/p\u003e\n\u003cp\u003eThis kit features a heimed rod design that completely eliminates deflection. That means no more guessing games when you’re trying to make those toe adjustments. You can dial it in quickly and accurately, which is a huge relief when you’re out on the track pushing your ride to its limits.\u003c\/p\u003e\n\u003cp\u003eWhat’s really cool about this setup is that it replaces those factory eccentrics with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCNC offset aluminum lockout blocks\u003c\/strong\u003e. These bad boys allow for significant adjustments while minimizing the need for constant tweaking. Plus, they eliminate any chance of slippage, which is a big deal when you’re looking to maintain precision under load. Your car will feel more predictable and stable, which is exactly what you want when you’re tearing up the asphalt.\u003c\/p\u003e\n\u003cp\u003eNow, let’s talk fitment. This kit is designed for the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eChevrolet Corvette C7 (2014+)\u003c\/strong\u003e, so if you’ve got a Grand Sport from 2017 to 2020, a Z06 from 2014 to 2020, or even a ZR1 from 2019 to 2020, you’re in luck. It’s a solid upgrade that I can personally vouch for—once you make the switch, you’ll wonder how you ever lived without it.\u003c\/p\u003e\n\u003cp\u003eIn short, if you’re serious about getting your alignment right and keeping your Corvette performing at its best, the LG Rear HD Tie Rod Kit is worth every penny. It’s all about making your ride more enjoyable and keeping you in control when it matters most.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eETA is 6-8 weeks these are built specifically for each car. Cannot cancel.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePart Number - LG7TRA\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47282995265674,"sku":null,"price":529.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/LG7TRA.webp?v=1762528140"},{"product_id":"afe-power-control-pfadt-series-lowering-kit-chevrolet-corvette-c6-c7","title":"aFe Power Control PFADT Series Lowering Kit Chevrolet Corvette C6 | C7","description":"\u003cdiv class=\"vr-content\"\u003eaFe Control is proud to release the PFADT Series, Lowering Kit for 2005 \u0026amp; Up Corvette C6 \u0026amp; C7. This lowering kit is designed to lower your C6\/C7 up to 1.25\" enhancing the sleek, body lines, and giving it a more aggressive, stylish look. Designed to work with the factory transverse leaf springs, the package includes 4 lowering bolts. These aren t ordinary bolts, unlike the factory bolt and pad, the included bolts feature a CNC, machined stainless steel stud with wrench flats, mated to a articulating foot, and a nylon foot pad. This design offers years of corrosion resistance and smooth suspension articulation, and quiet operation. Designed as a direct fit installation, no modifications is necessary. The lowering kit can be used with factory shock absorbers, or for a even better ride, try aFe s Johnny O Connell signature series shock upgrade.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 1.25 inches of drop\u003c\/li\u003e\n\u003cli\u003eStainless Steel, CNC machined adjuster stud with wrench flats\u003c\/li\u003e\n\u003cli\u003eArticulating ball stud\u003c\/li\u003e\n\u003cli\u003eNylon foot pads\u003c\/li\u003e\n\u003cli\u003eDirect fit Installation\u003c\/li\u003e\n\u003cli\u003eNo modifications necessary\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet Corvette C6 | C7 \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eOther Part Numbers:\u003c\/b\u003e\u003cbr\u003eAFE #afe410-401001-A\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47283003981962,"sku":null,"price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/410-401001-A.webp?v=1762528230"},{"product_id":"lg-motorsports-single-adjustable-g2r-coilover-kit-for-chevrolet-c5-c6-c7","title":"LG Motorsports Single Adjustable G2R Coilover Kit for Chevrolet C5 C6 C7","description":"\u003cp\u003eAvailable in non-adjustable, single, double, or triple.\u003c\/p\u003e\n\u003cp\u003eWhen it comes to shock technology, Bilstein is the real deal. Their nitrogen-filled separate chamber system has been the go-to for shock absorbers for years, and it’s easy to see why. We’ve been using these Aluminum Body Bilstein Shocks as the backbone of our Coil Over package for quite some time now, and they’ve never let us down.\u003c\/p\u003e\n\u003cp\u003eWhat sets these shocks apart? Well, Lou and the engineers at Bilstein really nailed the valving after countless hours on both the track and the street. They’ve crafted a setup that works beautifully for both daily drivers and race cars. If you’ve followed our journey, you know we’ve had some serious success with the Bilstein\/LG Coil Over package, taking on tough competitors and coming out on top.\u003c\/p\u003e\n\u003cp\u003eNow, if you’re considering a Coil Over package, there are a few things you should definitely keep in mind:\u003c\/p\u003e\n\u003cp\u003eMaterial: Are the shocks made from heavy steel or lightweight aluminum? Trust me, aluminum makes a difference.\u003cbr\u003eGas-Filled Technology: Make sure it has a separate gas chamber. If not, you’ll end up with air bubbles in the oil, which can mess with the shock’s performance.\u003cbr\u003eSpring Quality: What brand are you getting? Eibach and Hypercoil are solid choices. Avoid those no-name springs that sag over time.\u003cbr\u003eShock Length: You don’t want them bottoming out in a corner. We worked with Bilstein to get our shocks custom lengthened, so you won’t have to worry about that issue.\u003cbr\u003eAdjustability: Our Shock\/Spring package is designed for real-world performance, not just a generic solution. It was developed by Lou alongside Bilstein’s engineers, right at the racetrack.\u003cbr\u003eOver the last 15 years, we’ve refined our series C setup to keep it current and effective. When you order, give us a shout about your vehicle setup. We’re not just pulling these off the shelf; every kit is valved, verified on the shock dyno, and assembled in-house specifically for your car. It’s all about getting it right for you.\u003c\/p\u003e\n\u003cp\u003eFitment:\u003c\/p\u003e\n\u003cp\u003eChevrolet Corvette 1997-2013\u003cbr\u003eChevrolet Corvette Grand Sport 2010-2013 \u0026amp; 2017-2020\u003cbr\u003eChevrolet Corvette Stingray 2014-2024\u003cbr\u003eChevrolet Corvette Z06 2001-2004 \u0026amp; 2006-2020 \u0026amp; 2023\u003cbr\u003eChevrolet Corvette Z51 2020-2024\u003cbr\u003eChevrolet Corvette ZR1 2009-2013 \u0026amp; 2019-2020\u003cbr\u003eIf you’re serious about performance, the LGG2RS LG Motorsports Single Adjustable G2R Coilover Kit for the Chevrolet C5, C6, C7, and C8 is worth a look. You won’t be disappointed.\u003c\/p\u003e\n\u003cp\u003eNote: ETA is 6-8 weeks these are built specifically for each car. Cannot cancel.\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47283040223370,"sku":null,"price":4500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/LGG2R_1.webp?v=1762528369"},{"product_id":"momo-daytona-evo-x-large-black","title":"Momo Daytona Evo X-Large Black","description":"\u003cp\u003e\u003cspan\u003eThe MOMO Motorsport Daytona EVO takes the already impressive MOMO Daytona racing seat to new heights. With the addition of comfort pads strategically placed throughout the seat's back and bolsters, this seat offers enhanced ergonomics and support. Upholstered in breathable fire-retardant black fabric, the FIA rated Daytona Evo features side head bolsters that effectively reduce lateral helmet movements, providing additional support and protection. FIA Certification expires 2029.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHans compatible design\u003c\/li\u003e\n\u003cli\u003eAirnet technical material allows for quicker post-race drying\u003c\/li\u003e\n\u003cli\u003eFire retardant fabric\u003c\/li\u003e\n\u003cli\u003eKinder Point keeps the driver firmly seated\u003c\/li\u003e\n\u003cli\u003eDouble-Leg Cushions enhance support and comfort, with the flexibility to be removed for extra headroom\u003c\/li\u003e\n\u003cli\u003eSize Options: Standard, XL \u0026amp; XXL\u003c\/li\u003e\n\u003cli\u003eFIA Standard: FIA 8855-1999\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLooking for another size? Message us!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStandard Sizing:\n\u003cul\u003e\n\u003cli\u003eA: 21.7\u003c\/li\u003e\n\u003cli\u003eB: 23.6\u003c\/li\u003e\n\u003cli\u003eC: 18.9\u003c\/li\u003e\n\u003cli\u003eD: 35.8\u003c\/li\u003e\n\u003cli\u003eE: 16.7\u003c\/li\u003e\n\u003cli\u003eF: 16.3\u003c\/li\u003e\n\u003cli\u003eG: 18.9\u003c\/li\u003e\n\u003cli\u003eH: 15.2\u003c\/li\u003e\n\u003cli\u003eI: 18.3\u003c\/li\u003e\n\u003cli\u003eL: 11.4\u003c\/li\u003e\n\u003cli\u003eM: 8.7\u003c\/li\u003e\n\u003cli\u003eN: 14.6\u003c\/li\u003e\n\u003cli\u003eO: 16.1\u003c\/li\u003e\n\u003cli\u003eLbs: 22\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47283059720330,"sku":null,"price":819.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/1076BLK-29.webp?v=1762528932"},{"product_id":"sparco-black-qrt-r-2019-competition-seat","title":"Sparco Black QRT-R 2019 Competition Seat","description":"\u003cdiv class=\"vr-content\"\u003e\n\u003ch2\u003eIntroducing the QRT-R Racing Seat\u003c\/h2\u003e\n\u003cp\u003eThe QRT-R is not just any racing seat; it's the first to showcase Sparco's innovative QRT ultra-light technology. This remarkable feature offers an incredible strength-to-weight ratio for fiberglass composite racing seats, making it a game-changer on the track.\u003c\/p\u003e\n\u003ch3\u003eLightweight Design\u003c\/h3\u003e\n\u003cp\u003eWith QRT Technology, you can expect an average weight savings of 7 lbs’sometimes even up to 10 lbs or more’per shell. What does this mean for you? The QRT-R gets you close to the weight of a carbon fiber seat but at a much friendlier price point for fiberglass seats. Weighing in at just 9.9 lbs for the shell (and only 15 lbs when fully trimmed), the QRT-R proudly holds the title of the lightest \"Medium\/Large\" size fiberglass seat on the market.\u003c\/p\u003e\n\u003ch3\u003eComfortable Fit\u003c\/h3\u003e\n\u003cp\u003eDesigned with a unique CAD layout, the QRT-R offers a lower seating position that comfortably accommodates larger or taller drivers. Plus, its smaller outer dimensions make it a perfect fit for compact vehicles, ensuring that you can enjoy the thrill of racing without compromising on comfort.\u003c\/p\u003e\n\u003ch3\u003eSafety and Approval\u003c\/h3\u003e\n\u003cp\u003eRest assured, the QRT-R is FIA approved, meeting the highest safety standards in the industry.\u003c\/p\u003e\n\u003ch4\u003eKey Features:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLightest \"Medium\/Large\" size fiberglass seat available\u003c\/li\u003e\n\u003cli\u003eLower seating position designed for taller or larger drivers\u003c\/li\u003e\n\u003cli\u003eCompact outer dimensions for fitting into smaller vehicles\u003c\/li\u003e\n\u003cli\u003eQRT Technology provides an average weight savings of 7 lbs per shell\u003c\/li\u003e\n\u003cli\u003eFIA approved for your peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eImportant Note:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMust use Side Mount 600QRT for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLooking for another size? Message us!\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb\u003eOther Part Numbers:\u003c\/b\u003e\u003cbr\u003eSparco #spa008012RNR\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47283071746186,"sku":null,"price":929.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/Sparco_008012RNR.webp?v=1762529078"},{"product_id":"professional-awesome-universal-quick-release-splitter-support-system","title":"Professional Awesome Universal Quick Release Splitter Support System","description":"\u003cp\u003eOptions** Message us to specify what you need.\u003c\/p\u003e\n\u003cp\u003eMount Length - Short, Medium, Long\u003c\/p\u003e\n\u003cp\u003eSpreader Plate - Yes or No\u003c\/p\u003e\n\u003cp\u003eElevator Bolt Length - 30mm, 35mm\u003c\/p\u003e\n\u003cp\u003eReceiver Size - Regular, Large\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eYou know what we hate? All the hassle with tools and time wasted bolting on a splitter after the car comes off the trailer. You know what we hate even more? Taking it off again.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe hated this process so much we came up with the fastest and easiest splitter release system we could think of. No tools needed. It’s strong, adjustable and most of all fast, very fast!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Professional Awesome Quick Release Splitter Support System uses a latching mechanism to allow for quick mounting and dismounting of your splitter. The latches are designed to hold upwards of 700 lbs. each. They are strong enough to support some of the craziest splitters you can imagine. All that is needed on your part is to add your own release handle and your quick release splitter dreams will be realized.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eExciting Features:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eQuick-release latching system makes installing a splitter easy.\u003c\/p\u003e\n\u003cp\u003eUniversal aluminum mounting plates for easy splitter height adjustment.\u003c\/p\u003e\n\u003cp\u003eMounts allow for changes in pitch to optimize performance.\u003c\/p\u003e\n\u003cp\u003eAll parts are either stainless steel or coated for protection against the elements.\u003c\/p\u003e\n\u003cp\u003eWhat’s Included:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e2 – Universal aluminum mounts\u003c\/p\u003e\n\u003cp\u003e2 – Latches, Left and right\u003c\/p\u003e\n\u003cp\u003e2 – Universal splitter foot mounts with stainless pins\u003c\/p\u003e\n\u003cp\u003e6 – M6x1.00 Bolts for universal mount to latches\u003c\/p\u003e\n\u003cp\u003e4 – M8 x 1.25 Elevator bolts for splitter mounting\u003c\/p\u003e\n\u003cp\u003e4 – M8 x 1.25 Nyloc nuts for elevator bolts\u003c\/p\u003e\n\u003cp\u003eWhat Elevator Bolts Should You Use?\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe recommend using additional support rods, such as our offerings here, as the design of the quick release allows for changes in angle of attack of the splitter.\u003c\/p\u003e\n\u003cp\u003eCustomers are required to add their own cables to operate the quick release system. These are not included as each vehicle and installation will be customized for the vehicle and its particular use case.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Short \/ Yes (only available with 35mm elevator bolts and regular receiver option) \/ Regular","offer_id":47331826958474,"sku":null,"price":239.99,"currency_code":"USD","in_stock":true},{"title":"Medium \/ Yes (only available with 35mm elevator bolts and regular receiver option) \/ Regular","offer_id":47331826991242,"sku":null,"price":279.99,"currency_code":"USD","in_stock":true},{"title":"Long \/ Yes (only available with 35mm elevator bolts and regular receiver option) \/ Regular","offer_id":47331827024010,"sku":null,"price":289.99,"currency_code":"USD","in_stock":true},{"title":"Short \/ No thanks \/ Regular","offer_id":47331827318922,"sku":null,"price":239.99,"currency_code":"USD","in_stock":true},{"title":"Medium \/ No thanks \/ Regular","offer_id":47331827351690,"sku":null,"price":279.99,"currency_code":"USD","in_stock":true},{"title":"Long \/ No thanks \/ Regular","offer_id":47331827384458,"sku":null,"price":289.99,"currency_code":"USD","in_stock":true},{"title":"Short \/ Yes (only available with 35mm elevator bolts and regular receiver option) \/ Large","offer_id":47331831218314,"sku":null,"price":239.99,"currency_code":"USD","in_stock":true},{"title":"Short \/ No thanks \/ Large","offer_id":47331831251082,"sku":null,"price":239.99,"currency_code":"USD","in_stock":true},{"title":"Medium \/ Yes (only available with 35mm elevator bolts and regular receiver option) \/ Large","offer_id":47331831283850,"sku":null,"price":279.99,"currency_code":"USD","in_stock":true},{"title":"Medium \/ No thanks \/ Large","offer_id":47331831316618,"sku":null,"price":279.99,"currency_code":"USD","in_stock":true},{"title":"Long \/ Yes (only available with 35mm elevator bolts and regular receiver option) \/ Large","offer_id":47331831349386,"sku":null,"price":289.99,"currency_code":"USD","in_stock":true},{"title":"Long \/ No thanks \/ Large","offer_id":47331831382154,"sku":null,"price":289.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/rn-image_picker_lib_temp_d993c3c0-ecd3-4b3b-ae6b-ee0b748b094d.jpg?v=1762994834"},{"product_id":"professional-awesome-splitter-support-rods-pair","title":"Professional Awesome Splitter Support Rods – Pair","description":"\u003cp\u003eOptions** Message us with your options.\u003c\/p\u003e\n\u003cp\u003eRod Length - 18\", 36\", 48\"\u003c\/p\u003e\n\u003cp\u003eClevis Options - Standard M8x1.25, 2 Standard 2 Fancy, 4 Fancy\u003c\/p\u003e\n\u003cp\u003ePair of Titanium Skid Pucks to Protect Bottom of Splitter - Yes, No\u003c\/p\u003e\n\u003cp\u003ePair of Elevator Bolts - (2) M8x1.25 20mm, (2) M8x1.25 25mm, None\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eparticularly well with wood based splitters. Care should be taken when using Elevator bolts with Alumalite as it’s easy to over-tighten and crush the Alumalite. Elevator bolts are not recommended for most carbon fiber splitters.\u003c\/p\u003e\n\u003cp\u003eWhat’s Included:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e2- rods\u003c\/p\u003e\n\u003cp\u003e4- rod ends with compression fittings\u003c\/p\u003e\n\u003cp\u003e4- M8-1.25 thread pitch clevises.\u003c\/p\u003e\n\u003cp\u003eOptional “Fancy” Aluminum clevis upgrade available. (This is a purely cosmetic option)\u003c\/p\u003e\n\u003cp\u003e4- clevis pins\u003c\/p\u003e\n\u003cp\u003e4- hitch pin clips\u003c\/p\u003e\n\u003cp\u003eOptional 2- M8 elevator bolts (used to attached clevises to your splitter) OR\u003c\/p\u003e\n\u003cp\u003eOptional 2- Titanium Splitter Support Pucks (used to attach clevises to your splitter and protect your splitter from impacts with the ground)\u003c\/p\u003e\n\u003cp\u003eInstallation Notes:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTorque the compression fitting to 20-22 lb-ft. This can be accomplished with a crowfoot wrench.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"18\" \/ Standard M8x1.25 \/ Yes","offer_id":47331833970826,"sku":null,"price":159.99,"currency_code":"USD","in_stock":true},{"title":"36\" \/ Standard M8x1.25 \/ Yes","offer_id":47331834003594,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true},{"title":"48\" \/ Standard M8x1.25 \/ Yes","offer_id":47331834036362,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true},{"title":"18\" \/ 2 Fancy, 2 Standard \/ Yes","offer_id":47331841343626,"sku":null,"price":159.99,"currency_code":"USD","in_stock":true},{"title":"18\" \/ 4 Fancy \/ Yes","offer_id":47331841376394,"sku":null,"price":159.99,"currency_code":"USD","in_stock":true},{"title":"36\" \/ 2 Fancy, 2 Standard \/ Yes","offer_id":47331841409162,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true},{"title":"36\" \/ 4 Fancy \/ Yes","offer_id":47331841441930,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true},{"title":"48\" \/ 2 Fancy, 2 Standard \/ Yes","offer_id":47331841474698,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true},{"title":"48\" \/ 4 Fancy \/ Yes","offer_id":47331841507466,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true},{"title":"18\" \/ Standard M8x1.25 \/ No thanks","offer_id":47331842162826,"sku":null,"price":159.99,"currency_code":"USD","in_stock":true},{"title":"18\" \/ 2 Fancy, 2 Standard \/ No thanks","offer_id":47331842195594,"sku":null,"price":159.99,"currency_code":"USD","in_stock":true},{"title":"18\" \/ 4 Fancy \/ No thanks","offer_id":47331842228362,"sku":null,"price":159.99,"currency_code":"USD","in_stock":true},{"title":"36\" \/ Standard M8x1.25 \/ No thanks","offer_id":47331842261130,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true},{"title":"36\" \/ 2 Fancy, 2 Standard \/ No thanks","offer_id":47331842293898,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true},{"title":"36\" \/ 4 Fancy \/ No thanks","offer_id":47331842326666,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true},{"title":"48\" \/ Standard M8x1.25 \/ No thanks","offer_id":47331842359434,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true},{"title":"48\" \/ 2 Fancy, 2 Standard \/ No thanks","offer_id":47331842392202,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true},{"title":"48\" \/ 4 Fancy \/ No thanks","offer_id":47331842424970,"sku":null,"price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/rn-image_picker_lib_temp_9bc51955-b926-46bc-a680-6d777142b67c.jpg?v=1762995410"},{"product_id":"antigravity-40ah-h6-group-48-lithium-car-battery-w-re-start","title":"Antigravity 40Ah H6\/Group 48 Lithium Car Battery w\/Re-Start","description":"\u003cp\u003e\u003cspan\u003eAG-H6-40-RS\u003c\/span\u003e\u003c\/p\u003e","brand":"The Speed Workshop","offers":[{"title":"Default Title","offer_id":47453831495818,"sku":null,"price":949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/files\/IMG-6515.webp?v=1765553548"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/2357\/8506\/collections\/images.jpg?v=1762351555","url":"https:\/\/speedworkshop.com\/collections\/c7-corvette.oembed","provider":"The Speed Workshop","version":"1.0","type":"link"}